The Effections of Benzoyl peroxide

Benzoyl peroxide is white, odorless powder with its melting point 105 °C(lit.) and boiling point 176 °C. Molecular Weight: 242.23g/mol. It consists of two benzoyl groups bridged by a peroxide link. To use the lotion, cream, or gel, first wash the affected skin areas and gently pat dry with a towel. Then apply a small amount of benzoyl Peroxide, rub it in gently.

It is water insoluble,highly flammable.moderately toxic. Its structural formula is [C6H5C(O)]2O2. The cleansing liquid and bar are used to wash the affected area as directed. The effectiveness of benzoyl peroxide appears to be due to its antibacterial, peeling (keratolytic), and drying actions.

Benzoyl peroxide is used as an acne treatment, for improving flour, for bleaching hair and teeth, for polymerising polyester and many other uses. It is a strong oxidizer and is incompatible with reducing agents, acids, bases, alcohols, metals, organic materials. Molecular Formula: C14H10O4.  It is one of the most important organic peroxides in terms of applications and the scale of its production.

This product should be stored at 2°C to 8°C.Benzoyl peroxide is used as an acne treatment, for improving flour, for bleaching hair and teeth, for polymerising polyester and many other uses.

Benzoyl peroxide is generally an inexpensive treatment, and the generic products work just like the name brands do. Benzoyl peroxide is often the first treatment choice for those suffering from mild to moderate acne.

More about; Benzoyl peroxide

Read more>> http://www.base-chemicals.net/

The Use of Acrylic resin

Acrylic resin is light yellow liquid with its boiling point 116 °C  . Molecular Formula: C3H4O2. It can be  used to improve the processing performance of polyvinyl chloride. It also can be used as  a corrosion inhibitor, water stabilizer, quenching agents, thickeners, etc.

General Description: Acrylic acid is a blanched liquidity with a distinctive blistering olfactory sensation. Brassy breaker point 130° fine. Moiling betoken 286° degree Fahrenheit.

Immobilising charge 53° F. Caustic to alloys and weave. Drew out photograph to attack or heat force out causal agent polymerization. If polymerization goes on in a closed container, violent rupture may occur. The inhibitor (usually hydroquinone) greatly reduces the tendency to polymerize.

Acrylic Acid Glacial is a bloodless melted. Exhilarating odour. Acrylic paint battery-acid gelid causes cleared the homopolymerization or polymers used incoating, copolymerization, adhesives, solid mould plastic resin, etc. Also exploited for resin cooking up, unreal pencil eraser latex fabricating, etcetera. Coat formulation. Pharmaceutical manufacture.

More about: The Use of Acrylic resin

Read more>> http://www.base-chemicals.net/

How to Use 1,2-Dichloroethane

1,2-Dichloroethane is clear colorless liquid with a chloroform-like odor.Its melting point is-35 °C  and the  boiling compass point lives 83 °C(fired up.).It is insoluble in water. Some people who drink water containing 1,2-dichloroethane well in overabundance of the greatest contaminant layer (MCL) for many geezerhood may deliver an accrued jeopardy of arriving cancer. The most common use of 1,2-dichloroethane is in the production of vinyl chloride which is used to make a variety of plastic and vinyl products including polyvinyl chloride (PVC) pipes, furniture and automobile upholstery, wall coverings, housewares, and automobile parts. It is also used to as a solvent and is added to leaded gasoline to remove lead.

It is highly flammalbe.It can be used as solvents in the pharmaceutical industry and process intermediates in the chemical industriousness.

This cartesian product should cost stacked away from 0°C to 6°C.

The greatest use of 1,2-dichloroethane is in making chemicals involved in plastics, rubber and synthetic textile fibers. Other uses include: as a solvent for resins and fats, photography, photocopying, cosmetics, drugs, and as a fumigant for grains and orchards.

This health effects language is not intended to catalog all possible health effects for 1,2-dichloroethane. Rather, it is intended to inform consumers of some of the possible health effects associated with 1,2-dichloroethane in drinking water when the rule was finalized.

More about; How to Use 1,2-Dichloroethane

Read more>> www.base-chemicals.net

The functions of SBR

SBR is a solid or viscous liquid.The form is depended upon the degree of polymerisation. Molecular Formula: C36H42X2. Molecular Weight: 474.72g/mol. It is stable ,combustible ,incompatible with strong oxidizing agents. Some guidance information for reconstruction of the high-frequency spectral envelope is transmitted as side information. It acts directly on the monomer during polymerization. When needed, it also reconstructs or adaptively mixes in noise-like fact inwards picked out absolute frequency bandings in order to faithfully replicate signals that originally contained no or fewer tonal components. SBR is sequence Sequencing Batch Reactor (Sequencing Batch Reactor Activated Sludge Process) for short, is an intermittent aeration by way of operation active Sludge sewage treatment technology, also called Sequencing Batch type of Activated Sludge.

It can also be used to alter the rheology (deformation and flow) of polypropylene to make it more fluid and easier to process.

Spectral band replication (SBR) is a engineering to raise audio or oral communication codecs, especially at low bit rates and equals free-based during harmonised redundancy in the frequency domain.

SBR fire embody commingled with any audio coalition codec: the codec itself carries the depress and midfrequencies of the spectrum, although SBR reduplicates more eminent frequency depicted object from permuting up harmonics from the lower and midfrequencies at the decoder.

More about: The functions of SBR

Rea more>> http://www.base-chemicals.net/

Bis Tri-n-butyltin Oxide Supplier conier

Bis Tri-n-butyltin Oxide is a clear colorless liquid with its melting point -45°C and boiling point 180 °C2 mm Hg(lit.). It is water insoluble,air and moiture sensitive.It can be used as a bactericide, fungicide and chemical intermediate. This product should be stored at 4°C . Supplier conier (Conier chem&pharma Co.,Ltd)

Tributyltin compounds had been used as marine anti-biofouling agents. Concerns over toxicity of these compounds (some reports describe biological effects to marine life at a concentration of 1 nanogram per liter) have led to a worldwide ban by the International Maritime Organization.[1] It is now considered a severe marine pollutant.Iupac name Bis(tri-N-butyltin)oxide, Registry number Molecular Formula C24H54OSn Molecular weight, 596.07216

Tributyltin oxide (TBTO), or bis(tri-n-butyltin)oxide, is an organotin combine primarily exploited as a biocide (fungicide and molluscicide), particularly a Mrs. Henry Wood preservative. It is chemic know-how costs C24H54OSn2. It delivers the class of a melt off, bleached to pale yellow liquid with fading breaker point -45 °centred, boiling channelise 180 °blow, and slight water solubility (20 ppm). It is combustible and soluble in organic solvents.

More about: Bis tri-n-butyltin oxide Sale

Read more>> www.base-chemicals.net

The Functions of Triphenylphosphine

Triphenylphosphine is a white solid with its melting point 79-81 °C(lit.) and boiling point 377 °C(lit.). This  product should be stored at room temperature. It is insoluble in water. It is stable but incompatible with oxidizing agents, acids.

A CuI-catalyzed coupling reaction of aryl iodides and sulfur pulverise goes on incoming the presence of K2CO3 at 90°C in DMF when resolution. The pairing off smorgasbord makes up straight regaled with NaBH4 or triphenylphosphine to afford aryl thiols in good to excellent eases up. A extended compass of stepped in aryl thiols that assume methoxy, hydroxyl radical, carboxylate, amido, keto, bromo, and fluoro groups can be synthesized.

When the reaction is completed as monitored by TLC, the solvent is evaporated under reduced pressure, and the residue is purified by chromatography on silica gel (petroleum ether : ethyl acetate = 7:1) to afford the corresponding imidazolidione (72 mg, Y. 96%) as an oil. Triphenylphosphine is highly flammable.

Triphenylphosphine is a relatively low-budget inwardness. It give the sack be prepared incoming the laboratory by treatment of phosphorus trichloride with phenylmagnesium commonplace or phenyllithium. The industrial synthesis calls for the chemical reaction 'tween morning star trichloride, chlorobenzene, and atomic number 11. It can be used for catalysts. PPh3 exists as relatively air stable, colorless crystals at room temperature. It dissolves in non-polar organic solvents such as benzene and diethyl ether.

Read more: Buy Triphenylphosphine

Read more>> www.base-chemicals.net

The effective Usage of Acrylic Monomers

Acrylic Monomers can be used for  flocculants, dispersants, detergents, paints, inks, mucilages and adhesives, plastics, acrylic paint fibres and wareses for the leather and paper industries. Many consumer products like adhesives, paints, constricting factors and impression inks are acrylate resin acid based.

Acrylic acid is an highly-developed intercede mathematical product, which embodies created through discriminating accelerator pedal stage oxidization from propylene. The contrasting Acrylic blistering lineaments from Standard or Ester grade to high pressure pureness ground level give notice live either polymerized instantly to polyacrylates or can follow changed over into propenoate ester (propenoates) which are then afterward polymerized.

Acrylic Monomers and basic alkyl esters (methyl, ethyl group, butyl and 2-ethylhexyl esters) are habituated for the manufacture of polymer dispersions, adhesives, hyper- assimilating polymers, flocculants, detergents, varnishes, fibers and plastics in addition to every bit chemical intermediates.

Acrylates are mediate productions, which have a wide variety of applications incoming downstream and speciality petrochemical products, including in the production of super absorbent polymers, paints, coatings, textiles, plastic additives, adhesives etc.

More information: Acrylic Monomers

Read more>> http://www.base-chemicals.net/

Chloroform for Sale

Chloroform is clear colorless liquid with a distinguishing olfactory sensation.Its liquescent breaker point follows  -63 °centigrade and the  roiling breaker point is 61 °C. It is slightly soluble in water. It can be used as  a solvent, to cook else chemicals and as a fumigant.This product should be stored from 2°coulomb to 8°century. The protocol used by the contractor for surveying these data sources was developed by the National Institute for Occupational Safety and wellness (NIOSH), the Occupational refuge and wellness organization (OSHA), and the Department of Energy (DOE).

Chloroform is an essential bilobated with method CHCl3. Them comprises one and only of the four chloromethanes. The blanched, perfumed, obtuse melted costs a trihalomethane, and is considered reasonably dangerous. Numerous million tons are created yearly while a harbinger to polytetrafluoroethylene and refrigerants, but its use for refrigerants follows following phased prohibited.

These guidelines were formulated under contract bridge using loosely recognized secondary references. The information contained in these guidelines is intended for denotation resolves only if. None of the means deliver conducted a comprehensive check of the information and data held successful these roots.

More about: Buy Chloroform

Read more>> http://www.base-chemicals.net/

How to Buy Hydrazine hydrate

Hydrazine hydrate

CAS:7803-57-8

Molecular Formula:H6N2O

Molecular Weight: 50.06/mol

This product is colorless fuming smooth with a lightheaded ammonia-like olfactory sensation.The fading breaker point is −51.7 (lit.)  and the  boiling point is 120.1 (lit.).It is water soluble and will fume in air.It is nephrotoxic and destructive to tissue paper.It embodies flammable,stabilized but antonymous with a wide of the mark multifariousness of materials, including oxidizing agents, heavy metal oxides, dehydrating brokers, base alloys, eat, ash gray Strategic Arms Limitation Talks*. It give the sack be used to treat boiler water supply, industry boasting factors and intercedes, and sublimate preciously metals

This intersection should equal stashed away from rolled°atomic number 6 to half a dozen°C. Stability Incompatible with a wide variety of materials, including oxidizing brokers, enceinte antimonial oxides, dehydrating factors, alkali alloys, rust, silver salts. Combustible. Contact with many materials may have fire or explosive putrefaction. May oppose explosively with a salmagundi of materials, including dehydrating agents, cloggy aluminiferous ox.

More about: Buy Hydrazine hydrate

Read more>> http://www.base-chemicals.net/

Benzoyl peroxide for Sale

Benzoyl peroxide is white, odorless powder with its melting point  105(lit.) and boiling point 176. It is water insoluble,highly flammable.moderately toxic.It is a strong oxidizer and is incompatible with reducing agents, acids, bases, alcohols, metals, organic materials.This  product should be stored at 2to 8. Benzoyl peroxide is used as an acne treatment, for improving flour, for bleaching hair and teeth, for polymerising polyester and many other uses.

using common drugstore products. You may have even strained these intersections in front. But, when practiced on the dot for outlined below, the combination is incredibly effective.

prescription. Some products (such every bit cleansers, sparkle, or lotions) may require a prescription. Consult your furbish up or pill roller during the choice of the product that is best for you. Some products expect palpitation in front enjoyment. Balk your production software system to control if your configuration of this medication necessitates to personify shaken up.

Next, follow the finding supplies link to make sure you get the right products. If you get your products at the drugstore, be absolutely sure to print out my guide to buying drugstore products for complete instructions on how to avoid comedogenic ingredients.

More about: Buy Benzoyl peroxide

Read more>> www.base-chemicals.net

The Use of Polyvinyl chloride

Polyvinyl chloride ,commonly abbreviated PVC, is a thermoplastic polymer. It costs a vinyl group polymer made of reduplicating vinyl groups (ethenyls) having one of their hydrogens replaced with a chloride group. The plumbing fashionable your put up personifies plausibly PVC pipe, unless thems an more honest-to-goodness. It is stable, flammable ,uncongenial with strong oxidizing factors.It lives often provided for research as a 50% suspension in water.Polyvinyl chloride makes up the ordinal virtually widely produced plastic, after polyethylene and polypropene.premature ventricular contraction is widely victimised chichi well-formed expression because it costs garish, long-wearing, and slowly to get together. PVC production is gestated to outmatch 40 million tons away 2016. In the seventies, PVC was often ill-used to do vinyl railroad track car elevations. Other concerns extend to the products useful life and incineration, especially in accidental and uncontrolled circumstances, it may liberate persistent toxins (see the section "Health and safety"), which the manufacture, use and destruction of suitable alternative plastics such as polypropylene do not.

Poly(vinyl chloride) is the impressionable best-known at the hardware store as PVC. This is the PVC from which shrills are cooked, and PVC pipe is everywhere. PVC pipe is what rural high schools with small budgets habituate to create goal Emily Post* for their football fields. But there's added to PVC than just pipe. The "vinyl" rooting practised on houses is made of poly(vinyl group chloride). Indoors the household, PVC is used to constitute linoleum for the level.

Polyvinyl chloride, commonly abbreviated PVC, is a thermoplastic polymer. It follows a vinyl polymer constructed of repeating vinyl radical groupings (ethenyls) delivering unmatchable small number 1 supplanted gone chloride. Polyvinyl chloride makes up the tertiary virtually widely brought out pliant, after polythene and polypropene.

More about: Buy Polyvinyl chloride

Read more>> www.base-chemicals.net

Dichloromethane for Sale

Dichloromethane is principally used as a solvent in paint removers and as an aerosol propellant. CAS: 75-. This product is colorless liquid with its melting point  −9(lit.) and the  boiling point 39.8-40  mm Hg(lit.). It is used as a blowing and cleaning agent in the production of urethane foam and plastic fabrication and in paint stripping operations. There is a sweet,penetrating ,ether-like odor. It is used in metal cleaning, as a solvent in the production of polycarbonate resins, in film processing, and in ink formulations. The vapors are narcotic in high concentration.It can be used as a solvent and paint remover.This product should be stored at room temperature. Dichloromethane's use in aerosol products includes paints and automotive spray products. It is soluble in water and its solubility in water is 20g/L at 20°C.It is harmful. Dichloromethane is used in the food industry as an extraction solvent for spices, caffeine (decaffeinated coffee), and hops.  It may emit toxic chloride fumes when exposed to high temperature.

Synonyms: Methylene chloride, Methylene dichloride, Methane dichloride, Methylene bichloride, dichloromethane, Aerothene MM. Molecular Formula: CH2Cl2.

Dichloromethane is chemically stable. It is slightly soluble in water. Molecular Weight: 84.93 /mol. Harmful if swallowed or inhaled. May be harmful by skin contact. Eye and skin irritant. Readily absorbed through the skin. Asphyxiant. Causes CNS depression. Possibly carcinogenic in humans. Possible mutagen. Experimental reproductive effects. Dichloromethane is produced by treating either methyl chloride or methane with chlorine gas at 400–500. At these temperatures, both methane and methyl chloride undergo a series of reactions producing progressively more chlorinated products. Dichloromethane's volatility and ability to dissolve a wide range of organic compounds makes it a useful solvent for many chemical processes. Concerns about its health effects have led to a search for alternatives in many of these applications.

More about: Buy Dichloromethane

Read more>> http://www.base-chemicals.net/

How to Buy 1,2-Dichloroethane

1,2-Dichloroethane was formerly a component of products used in the home such as some cleaning solutions and pesticides; some adhesives, such as those used to glue wallpaper or carpeting; and some paint, varnish, and finish removers.  This product is clear colorless liquid with a chloroform-like odor.Its melting point. and the boiling point. Although large amounts of 1,2-dichloroethane are produced today, the vast majority is used to make other chemical products. It is insoluble in water. It is highly flammalbe. Molecular Weight: 98.96g/mol. It can be used as solvents in the pharmaceutical industry and process intermediates in the chemical industry.This product should be stored from.

1,2-Dichloroethane is a clear, man-made liquid that is not found naturally in the environment. 1,2-Dichloroethane (also known as 1,2-ethylene dichloride, dichloroethylene, or ethylene dichloride) evaporates at room temperature and has a pleasant smell and a sweet taste. 1,2-Dichloroethane burns with a smoky flame. Its most common use today is to make vinyl chloride and several substances that dissolve grease, glue, and dirt. Molecular Formula: C2H4Cl2. 1,2-Dichloroethane is also added to leaded gasoline to remove lead. In the past, it was found in trace amounts in products that industry used to clean cloth, remove grease from metal, and to break down oils, fats, waxes, resins, and rubber.

1,2-Dichloroethane can enter the environment when it is made, packaged, shipped, or used. Most 1,2-dichloroethane is released to the air, although some is released to rivers or lakes. 1,2-Dichloroethane could also enter soil, water, or air in large amounts in an accidental spill.

The greatest use of 1,2-dichloroethane is in making chemicals involved in plastics, rubber and synthetic textile fibers. Other uses include: as a solvent for resins and fats, photography, photocopying, cosmetics, drugs, and as a fumigant for grains and orchards.

More about: Buy 1,2-Dichloroethane

Read more>> http://www.base-chemicals.net/

How to Buy Polyethylene

Polyethylene is a solid  with its melting point  92 °C and freezing point 270 °C. It is stable, but breaks down slowly in uv light or sunlight ,incompatible with halogens, strong oxidizing agents, benzene, petroleum ether, aromatic and chlorinated hydrocarbons, lubricating oils. CAS: 9002-88-4. Polyethylene or polythene (IUPAC name polyethene or poly(methylene)) is the most widely used plastic, with an annual production of approximately 80 million metric tons. Its primary use is within packaging (notably the plastic shopping bag). Molecular Formula: [C2H4]n. This is the polymer that makes grocery bags, shampoo bottles, children's toys, and even bullet proof vests. For such a versatile material, it has a very simple structure, the simplest of all commercial polymers.

Polyethylene is probably the polymer you see most in daily life. Polyethylene is the most popular plastic in the world. A molecule of polyethylene is nothing more than a long chain of carbon atoms, with two hydrogen atoms attached to each carbon atom. That's what the picture at the top of the page shows. Thus, the alternate form, poly(ethylene terephthalate), is often used in scholarly journals for the sake of accuracy and clarity. Sometimes it's a little more complicated. Sometimes some of the carbons, instead of having hydrogens attached to them, will have long chains of polyethylene attached to them. The semicrystalline material might appear transparent (particle size < 500 nm) or opaque and white (particle size up to a few microns) depending on its crystal structure and particle size. Its monomer (bis-β-hydroxyterephthalate) can be synthesized by the esterification reaction between terephthalic acid and ethylene glycol with water as a byproduct, or by transesterification reaction between ethylene glycol and dimethyl terephthalate with methanol as a byproduct. This is called branched, or low-density polyethylene, or LDPE. When there is no branching, it is called linear polyethylene, or HDPE. Linear polyethylene is much stronger than branched polyethylene, but branched polyethylene is cheaper and easier to make.

Polyethylene is a thermoplastic polymer consisting of long chains produced by combining the ingredient monomer ethylene (IUPAC name ethene), the name comes from the ingredient and not the actual chemical resulting.

More about; Buy Polyethylene

Read more>> http://www.base-chemicals.net/

Where to Get Undecylenic acid

Undecylenic acid is an organic unsaturated fatty acid derived from castor oil. It is the common name of the 10-undecenoic acid, (CH2CH(CH2)8COOH). In a study on denture liners, undecylenic acid in the liners was found to inhibit conversion of yeast to the hyphal form. Hyphae were associated with active infection. Molecular Weight:184.28 g/mol. It is used in the manufacture of pharmaceuticals, cosmetics and perfumery, including antidandruff shampoos, antimicrobial powders and as a musk in perfumes and aromas. Undecylenic acid is produced by cracking of castor oil under pressure. At least one of the mechanisms underlying its anti-fungal effects observed is its inhibition of morphogenesis of Candida albicans.

This product is a pale yellow crystal low melting solid. The melting point is 23-25 °C(lit.) and the boiling point is 137 °C2 mm Hg(lit.). CAS:112-38-9. It is insoluble in water. It can be used for fragrances, cosmetics and pharmaceuticals. Molecular Formula:C11H20O2. Increasing recognition is also being given in women's health to the relationship between gut flora and vaginal flora; i.e., a healthy balance of gut flora has corresponding benefit to the vaginal flora.

Undecylenic acid topical is used to treat skin infections that are caused by fungus, such as athlete's foot, jock itch, diaper rash, prickly heat, excessive sweating in the groin area, itching, burning, and chafing. in the microbial flora of the digestive tract, including an unhealthy diet, inadequate digestive enzymes, oral contraceptives, and the use of various prescription and OTC drugs.

More about: Buy Undecylenic acid

Read more>> http://www.base-chemicals.net/

What is Polyamide 11

Polyamide 11 (PA 11) or Nylon 11 is a polyamide bioplastic derived from vegetable oil.

It is produced by Arkema under the tradename Rilsan from castor beans. PA 11 is not biodegradable. Supplied in powder or pellet form,  resins can be processed by injection molding, extrusion, blown film extrusion, extrusion blow molding or rotomolding. Global economic growth is the major driver of the growth of polyamide. Automotive market that accounts for about 10% of the total polyamide consumption, is poised for good growth in polyamide applications due to new regulations.

Its properties are similar to PA12, although it has a lower environmental impact, consumes less non-renewable resources to be produced and has superior thermal resistance. PA 11 and 12 are available in rigid, semi-flexible and flexible grades. Technical parts used in industries accounts for a large use of polyamides worldwide.  According to one estimate, the automobile sector accounted for more than 30% share, and electronic and electrical industry accounted for almost 25% of polyamide consumption. 

Unpigmented and clear Powder as an additive for paints. Improves the scratch and abrasion resistance of paints. Allows for different texture depending on the granulometry used. Can be dispersed completely in liquid media. It is weaker but more resilient than the most common types of Nylon (6 and 6/6). It is used in high-performance applications such as automotive fuel lines, pneumatic airbrake tubing, electrical anti-termite cable sheathing, oil and gas flexible pipes and control fluid umbilicals, sports shoes, electronic device components, and catheters.

More about: Polyamide 11 Suppliers

Read more>> www.base-chemicals.net

What is Hydrochloric acid

Hydrochloric acid (HCL) is a colorless and odorless solution of hydrogen chloride and water. Hydrochloric Acid in its concentrated form is also commonly known as HCl, Muriatic Acid and Fuming Hydrochloric Acid.  All these names refer to essentially the same material. Prolonged exposure to low concentrations may also cause dental discoloration and erosion.  EPA has not classified hydrochloric acid for carcinogenicity.
Large-scale production of Hydrochloric Acid was first developed around the time of the Industrial Revolution and today Hydrochloric Acid is one of the most important acids in industry. Once commonly referred to as muriatic acid or spirit of salt, this acid is a highly corrosive chemical compound with several applications in industry.  Hydrocholoric acid is a clear, poisonous liquid. It is highly corrosive, which means it immediately causes severe damage, such as burning, on contact. Acute oral exposure may cause corrosion of the mucous membranes, esophagus, and stomach and dermal contact may produce severe burns, ulceration, and scarring in humans.  Chronic (long-term) occupational exposure to hydrochloric acid has been reported to cause gastritis, chronic bronchitis, dermatitis, and photosensitization in workers.
Hydrochloric Acid has an interesting history which can be traced back to the Middle Ages when it was used by alchemists who were trying to trace the philosopher's stone. It is also found in diluted amounts in the stomach of humans and animals as gastric acid. clear colourless or slightly yellow liquid with pungent odour. Concentrated acid is fuming. Melting point: -25 C.

More about: Hydrochloric acid Sale
Read more>> www.base-chemicals.net

What is Polyamide 12

Polyamide-12 or Nylon-12 is used in fiber optic cables primarily as an anti-termite protection cover. It is an excellent cover for the fiber optic cables when the installation area is prone to attack from termites. Nylon-12 also possesses good chemical resistance characteristics.
Nylon is a generic designation for a family of synthetic polymers known generically as polyamides, first produced on February 28, 1935, by Wallace Carothers at DuPont's research facility at the DuPont Experimental Station. Nylon is one of the most commonly used polymers. Over the years, FPL has established 400 grades in 10 engineering polymers mostly specialising in niche compounds. FPL has approvals from various OEMs serving large sectors of industries with product reach internationally.
In Polyamide 12 Nanocomposites, the polyamide 12 resin forms the continuous matrix containing the nanoparticles. (RDC 5/7/2009). In addition to above FPL have many other formulations for many end-use applications. FPL also has many Application Specific grades and alloys / blends for many Specific requirements. May be some of them may suit your requirements also. Call on us to know more about us and about our FORMPOLY? product range.
More about: Buy Polyamide 12
Read more>> www.base-chemicals.net

What is Methyl chloride

Methyl chloride is colorless gas with a faint sweet odor .Its melting point is  ?97 °C(lit.) Chloromethane was first synthesized by the French chemists Jean-Baptiste Dumas and Eugene Peligot in 1835 by boiling a mixture of methanol, sulfuric acid, and sodium chloride. This method is similar to that used today. and the  boiling point is ?24.2 °C(lit.). Due to concerns about its toxicity, it is no longer present in consumer products. The main aim of the consortium is to register the substance as an intermediate.

However some members will make a full registration. The extra costs involved will be shared only with the companies that need a full registration. It stable ,highly flammable. but incompatible with natural rubber and neoprene composites.
Methyl Chloride is a colorless, flammable gas with a sweet odor. It is shipped in liquid form under its own vapor pressure. Typically used as a refrigerant and in the production of silicone and Butyl rubber. It may react violently or explosively with interhalogens, magnesium, zinc, potassium, sodium or their alloys. It may decompose when exposured to moist air or water. Health Organization (WHO). The overall objectives of the IPCS are to establish the scientific basis for assessment of the risk to human health and the environment from exposure to chemicals, through international peer review processes, as a prerequisite for the promotion of chemical safety, and to provide technical assistance in strengthening national capacities for the sound management of chemicals.
Chloromethane, also called methyl chloride, R-40 or HCC 40, is a chemical compound of the group of organic compounds called haloalkanes. Air samples were collected from various sites in stainless steel flasks and methyl chloride concentrations were measured using an Electron Capture Gas Chromatograph. It was once widely used as a refrigerant. It is a colorless extremely flammable gas with a minorly sweet odor, which is, however, detected at possibly toxic levels. It can be used  to make other chemicals and as a herbicide.This product should be stored from 2°C to 8°C.
More about: Methyl chloride Sale
Read more>> www.base-chemicals.net

What is 1,2-Dichloroethane

1,2-Dichloroethane is clear colorless liquid with a chloroform-like odor. The chemical compound 1,2-dichloroethane, commonly known by its old name of ethylene dichloride (EDC), is a chlorinated hydrocarbon, the major precursor for PVC production. It is insoluble in water.It is highly flammalbe. Its melting point is-35 °C  and the  boiling point is 83 °C(lit.).
1,2-Dichloroethane can be used as solvents in the pharmaceutical industry and process intermediates in the chemical industry.This product should be stored from 0°C to 6°C. It is mainly used to produce vinyl chloride monomer (VCM, chloroethene. Dioxolane and toluene are possible substitutes as solvents. Dichloroethane is unstable in the presence of aluminium metal and, when moist, with zinc and iron.
As a good apolar aprotic solvent, 1,2-dichloroethane is used as degreaser and paint remover. As a useful 'building block' reagent, it is used as an intermediate in the production of various organic compounds such as ethylenediamine. In the laboratory it is occasionally used as a source of chlorine, with elimination of ethene and chloride.
More about: Buy 1,2-Dichloroethane
Read more>> www.base-chemicals.net

What is Polyvinylidene fluoride

Polyvinylidene fluoride is white powder with its melting point 166-170°C. CAS:24937-79-9; Molecular Formula:(C2H2F2)n. For example, if you need a polymer that will withstand exposure to harsh thermal, chemical, or ultraviolent conditions, PVDF offers superior stability similar to the performance of fluoropolymers in these environments. It is soluble in some polar solvents such as organic esters and amines. Its highly desirable solubility and electrical properties result from the polarity of alternating CH2 and CF2 groups on the polymer chain. An extremely hard material, PVFD may be used at temperatures from -80 to 300°F (-62 to 149°C). It has a low density (1.78) and low cost compared to the other fluoropolymers.
Polyvinylidene fluoride (PVDF) is valued for its toughness, stability, and distinct engineering advantages.  It is stable but incompatible with strong oxidizing agents, silica. It can be used for coatings for chemical engineering equipment, electrical cables, high-protection coatings for metal surfaces, etc.
All of the options available can be autoclaved and gamma sterilized as well as exhibit low biomolecule binding characteristics. It is available as piping products, sheet, tubing, films, plate and an insulator for premium wire. It can be injected, molded or welded and is commonly used in the chemical, semiconductor, medical and defense industries, as well as in lithium ion batteries. It is also available as a crosslinked closed cell foam, used increasingly in aviation and aerospace applications.
More about: Buy Polyvinylidene fluoride
Read more>> www.base-chemicals.net

What is Acrylonitrile Butadiene Styrene

Acrylonitrile Butadiene Styrene is a white to off-white powder.The melting point is 58.54（±0.5）℃.It is soluble in acetone,MEK and DMK. CAS: 9003-56-9. It is a copolymer made by polymerizing styrene and acrylonitrile in the presence of polybutadiene.
ABS has good impact strength also at low temperatures. It acts directly on the monomer during polymerization. Molecular Weight: 633.91g/mol. The proportions can vary from 15 to 35% acrylonitrile, 5 to 30% butadiene and 40 to 60% styrene. The result is a long chain of polybutadiene criss-crossed with shorter chains of poly(styrene-co-acrylonitrile). The nitrile groups from neighboring chains, being polar, attract each other and bind the chains together, making ABS stronger than pure polystyrene. Acrylnitrile contributes with thermal and chemical resistence, and the rubberlike butadiene gives ductility and impact strength. Styrene gives the glossy surface and makes the material easily machinable and less expensive.
Acrylonitrile butadiene styrene materials can be processed by any of the standard thermoplastic processing methods. It can also be used to alter the rheology (deformation and flow) of polypropylene to make it more fluid and easier to process. Molecular Formula: C45H51N3X2. ABS is derived from acrylonitrile, butadiene, and styrene and carbon. Acrylonitrile is a synthetic monomer produced from propylene and ammonia; butadiene is a petroleum hydrocarbon obtained from the C4 fraction of steam cracking; styrene monomer is made by dehydrogenation of ethyl benzene — a hydrocarbon obtained in the reaction of ethylene and benzene. It has satisfactory stiffness and dimensional stability, glossy surface and is easy to machine.
More about:  Acrylonitrile Butadiene Styrene Sale
Read more: www.base-chemicals.net

Where to Buy Vinyl chloride

Vinyl chloride is a colorless gas with a sweet odor. Its melting point is  -153.8 °C(lit.) and the  boiling point is -13.4 °C(lit.). It is soluble in acetone,carbon disulfide,MEK and THF. It is highly flammalbe and can be easily ignited.
Vinyl chloride is also called vinyl chloride monomer, VCM or chloroethene. This colorless compound is an important industrial chemical chiefly used to produce the polymer polyvinyl chloride (PVC). It is stable but may be light sensitive.It is incompatible with strong oxidizing agents, chemically active metals, copper.
Vinyl chloride is a chemical intermediate, not a final product. Due to the hazardous nature of vinyl chloride to human health there are no end products that use vinyl chloride in its monomer form. Polyvinyl chloride is very stable, storable, and nowhere near as acutely hazardous as the monomer. It can be used as solvents in the pharmaceutical industry and process intermediates in the chemical industry. This product should be stored from 2°C to 8°C. Almost all vinyl chloride monomer (VCM) is used to create polymers, primarily PVC (polyvinyl chloride).

More about: Buy Vinyl chloride
Rea more>> www.base-chemicals.net

How to Buy Chlorine

Chlorine is a component of various compounds, including table salt. Chlorine was first produced in 1774 by Carl Wilhelm Scheele. Its melting point is -101 °C. Despite the accuracy of his observations, Scheele mistakenly thought the new gas was a dephlostiganated form of muriatic acid. The pure chemical element has the physical form of a diatomic green gas. The name chlorine is derived from chloros, meaning green, referring to the color of the gas.
Chlorine gas is two and one half times as heavy as air, has an intensely disagreeable suffocating odor, and is exceedingly poisonous. In its liquid and solid form it is a powerful oxidizing, bleaching, and disinfecting agent. Pharmaceuticals containing chlorine include those for treating malaria, whooping cough, typhoid fever and leukemia.
Chlorine is an important chemical in water purification, in disinfectants, in bleach and in mustard gas. It is used to kill bacteria and other microbes from drinking water supplies. Chlorine is also used widely in the manufacture of many products and items directly or indirectly, i.e. in paper product production, antiseptic, dyestuffs, food, insecticides, paints, petroleum products, plastics, medicines, textiles, solvents, and many other consumer products.

More about: Chlorine Sale
Read more>>  www.base-chemicals.net

Chlorine Suppliers

Chlorine is a component of various compounds, including table salt. Chlorine was first produced in 1774 by Carl Wilhelm Scheele. Its melting point is -101 °C. Despite the accuracy of his observations, Scheele mistakenly thought the new gas was a dephlostiganated form of muriatic acid. The pure chemical element has the physical form of a diatomic green gas. The name chlorine is derived from chloros, meaning green, referring to the color of the gas.
Chlorine gas is two and one half times as heavy as air, has an intensely disagreeable suffocating odor, and is exceedingly poisonous. In its liquid and solid form it is a powerful oxidizing, bleaching, and disinfecting agent. Pharmaceuticals containing chlorine include those for treating malaria, whooping cough, typhoid fever and leukemia.
Chlorine is an important chemical in water purification, in disinfectants, in bleach and in mustard gas. It is used to kill bacteria and other microbes from drinking water supplies. Chlorine is also used widely in the manufacture of many products and items directly or indirectly, i.e. in paper product production, antiseptic, dyestuffs, food, insecticides, paints, petroleum products, plastics, medicines, textiles, solvents, and many other consumer products.

More about: Chlorine Sale
Read more>>  www.base-chemicals.net

What is Bis tri-n-butyltin oxide

Bis(tri-n-butyltin)oxide (TBTO) is one of the organotin compounds that have been used as biocides and occur as persistent environmental pollutants. Human exposure to these compounds occurs through consumption of meat and fish products in which they accumulate. The most sensitive endpoint of TBTO exposure is immunotoxicity. TBTO causes thymus atrophy and thereby interferes with T-lymphocyte-mediated immune responses. Tributyltin compounds have been found to adversely affect a wide range of cellular components and processes in many species, organ systems, and cell types.
For each chemical with a positive (carcinogenic) experiment in the Carcinogenic Potency Database (CPDB), results are included on carcinogenic potency (TD50) in each species and target sites in males and females. Positivity is determined by an author’s opinion in a published paper. If all experimental results in the CDPB are negative in a sex-species group, “no positive” appears. The Carcinogenic Potency Database (CPDB) is a unique and widely used international resource of the results of 6540 chronic, long-term animal cancer tests on 1547 chemicals. Bis tri-n-butyltin oxide is a liquid derived by the hydrolysis of tributyl tin chloride, used as an agent to control the growth of most fungi, bacteria and marine organisms in plastics.
CAS: 56-35-9
Molecular Formula: 24H54OSn2
Molecular Weight: 596.1g/mol
MSDS Name: Bis(tri-n-butyltin) oxide stabilized 96% (stabilized with 0.1%
Synonym: HBD; Hexabutylditin oxide
Bis tri-n-butyltin oxide is a clear colorless liquid with its melting point -45°C and boiling point 180 °C2 mm Hg(lit.). It is water insoluble,air and moiture sensitive. It can be used as a bactericide, fungicide and chemical intermediate. This  product should be stored at 4°C .
More aboput: buy Bis tri-n-butyltin oxide
Read more>> www.base-chemicals.net

How to Buy Aluminum chloride

Aluminum chloride is a white to gray powder with a pungent odor.  Its melting point is 194 °C and the  boiling point is 180°C. It is wate soluble,moisture sensitive. Aluminium chloride (AlCl3) is the main compound of aluminium and chlorine. It is white, but samples are often contaminated with iron trichloride, giving it a yellow colour.  It is stable but reacts violently with water. It is corrosive to tissue and toxic by ingestion.This product should be stored from 2°C to 8°C. It is mainly produced and consumed in the production of aluminium metal, but large amounts are also used in other areas of chemical industry. It can also be used  as process intermediates in the chemical industry or, in the case of bleach, as a disinfectant.
CAS:7446-70-0
Aluminium chloride is hygroscopic, having a very high affinity for water. It fumes in moist air and hisses when mixed with liquid water as the Cl- ions are displaced with H2O molecules in the lattice to form the hexahydrate AlCl3·6H2O (also white to yellowish in color). Molecular Formula: AlCl3. Thus AlCl3 is probably the most commonly used Lewis acid and also one of the most powerful. It finds widespread application in the chemical industry as a catalyst for Friedel–Crafts reactions, both acylations and alkylations. Important products are detergents and ethylbenzene. It also finds use in polymerization and isomerization reactions of hydrocarbons.
Molecular Weight: 133.34g/mol. Aluminium chloride combined with aluminium in the presence of an arene can be used to synthesize bis(arene) metal complexes. bis(benzene)chromium, from certain metal halides via the so-called Fischer-Hafner synthesis.
More about: buy Aluminum chloride
Read more>>  www.base-chemicals.net

Where to Get Mixed Methyl fatty acid ester

Mixed Methyl fatty acid ester, also called Mixed Fatty Acids Methyl Ester-(UL-13C), is light yellow oil liquid.
Application:
As an important chemical intermediate, Fatty acid methyl ester is widely used in leather and daily chemicals. It can produce ester, ester ammonia, ester sulfonate and high carbon fatty acid, etc. Moreover, it can produce high carbon fatty acid, which are the key materials of cosmetic and flavors, it also can produce plasticizer, detergent and MES, which is ore dressing agent. It also can be reduced into mixed fatty acid, which is the material of soap and paint. Fatty acid methyl ester is the material of biodiesel too. In feather chemical industry, it can produce leather methyl eater agent or sulfonating succinic acid fatty amide ester disodium salt, which is a good washing aid.
Specification value: 175-200mgKOH/g and the iodine value 80-110gI2/100g(MAX).It is used in organic synthesis etc.
More about: buy  Mixed Methyl fatty acid ester
Read more>>  www.natural-fatty-acids.com

What is Caprylic acid

Caprylic acid is an antimicrobial pesticide used as a food contact surface sanitizer in commercial food handling establishments on dairy equipment, food processing equipment, breweries, wineries, and beverage processing plants. Caprylic acid is the common name for the eight-carbon saturated fatty acid known by the systematic name octanoic acid. Caprylic Acid is naturally derived from coconut oil. Due to its relatively short chain length it has no difficulty in penetrating fatty cell wall membranes, hence its effectiveness in combating certain lipid-coated bacteria, such as Staphylococcus aureus and various species of Streptococcus. It is an oily liquid that is minimally soluble in water with a slightly unpleasant rancid-like smell.Three such acids are named after goats: caproic (C6), caprylic (C8), capric (C10), totaling 15% in goat milk fat.
Caprylic Acid is a natural, herbal, botanical dietary supplement commonly available in pill, tablet, or capsule form. Caprylic acid are formulated as soluble concentrate/liquids and ready-to-use liquids. It must be covalently linked to the serine residue at the 3-position of ghrelin. Specifically, it must acylate the -OH group, for ghrelin to have its hunger-stimulating action on the feeding centers of the hypothalamus, though other fatty acids may have similar effects.
Usesage:
1.It is used commercially in the production of esters used in perfumery and also in the manufacture of dyes.
2.It is also used in the treatment of some bacterial infections. Caprylic Acid is a short chain fatty acid that has been known to possess anti-fungal activity for over 40 years.
3.Disinfectant in health care facilities, schools/colleges, animal care/veterinary facilities, industrial facilities, office buildings, recreational facilities, retail and wholesale establishments, livestock premises, restaurants, and hotels/motels.
4.Caprylic acid is used as an algaecide, bactericide, and fungicide in nurseries, greenhouses, garden centers, and interiorscapes on ornamentals.
More about: Caprylic acid Sale
Read more>> www.natural-fatty-acids.com

What is Sodium chlorate

Sodium chlorate is a white crystalline powder that is readily soluble in water.

Properties:
CAS: 7775-09-9
Molecular Formula: ClNaO3
Molecular Weight: 106.44g/mol
Water sulubllity: soluble
Sodium chlorate is a chemical compound with the chemical formula (NaClO3). When pure. It is a clear colorless liquid in water solution.The melting point is 248-261 °C(lit.). It is hygroscopic.  It decomposes above 250 °C to release oxygen and leave sodium chloride. It is noncombustible but  can accelerate the burning of surrounding combustible materials.It may cause fires or explosions when contacted with strong sulfuric acid.It can be used to bleach pulp and synthesize chemicals, as well as make herbicides. It is stable but incompatible with strong reducing agents, organic materials, alcohols. It is stable but incompatible with strong reducing agents, organic materials, alcohols.
More about: buy Sodium chlorate
Read more: www.base-chemicals.net

What is Methyl chloride

Methyl chloride is a colorless gas with a faint sweet smell and an odor threshold of 10 ppm.
CAS:74-87-3
Molecular Formula:CH3Cl
Molecular Weight: 50.49g/mol
Its melting point is  ?97 °C(lit.). Bp is ?24.2 °C(lit.). It may decompose when exposured to moist air or water.It can be used  to make other chemicals and as a herbicide. It stable ,highly flammable. But incompatible with natural rubber and neoprene composites. It may react violently or explosively with interhalogens, magnesium, zinc, potassium, sodium or their alloys. Methyl chloride has also caused effects on the heart rate, blood pressure, liver, and kidneys in humans.  Chronic (long-term) animal studies have shown liver, kidney, spleen, and central nervous system (CNS) effects. Inhalation studies have demonstrated that methyl chloride causes reproductive effects in male rats, with effects such as testicular lesions and decreased sperm production. This product should be stored from 2°C to 8°C.

Application:
1.Methyl chloride is used mainly in the production of silicones where it is used to make methylate silicon.
2.Methyl chloride was used widely in refrigerators in the past, but generally this use has been taken over by newer chemicals such as Freon.
3.production of agricultural chemicals, methyl cellulose, quaternary amines, and butyl rubber and for miscellaneous uses including tetramethyl lead.
More about: Methyl chloride Sale
Read more>>  

The use of Hydrazine hydrate

Hydrazine hydrate is a clear liquid. It smells a faint ammonia-like odor. Hydrazine hydroxide; Hydrazinium hydroxide; Idrazina idrata (Italian); DERIVATION ammonia with chloramine or sodium hypochlorite with urea . MELTING POINT  -51 C. It is water soluble and will fume in air. The melting point is ?51.7 °C(lit.) and the  boiling point is 120.1 °C(lit.). BOILING POINT 118 C . It can be used to treat boiler water, manufacture blowing agents and intermediates, and purify precious metals. It is toxic and corrosive to tissue. SPECIFIC GRAVITY  1.032  This product should be stored from 0°C to 6°C. It is combustible,stable but incompatible with a wide variety of materials, including oxidizing agents, heavy metal oxides, dehydrating agents, alkali metals, rust, silver salts.

More About: buy Hydrazine hydrate
Read more: www.base-chemicals.net

What is Chlorine

Chlorine is a light greenish-yellow gas. Chlorine is a material of various compounds as well as salt of table use. It is the second lightest halogen, found in the periodic table in group 17. Chlorine was first produced in 1774 by Carl Wilhelm Scheele.
It has an irritating odour. Water which has been treated with chlorine is effective in preventing the spread of waterborne disease. The most common compound of chlorine, sodium chloride, has been known since ancient times.
In the chemical industry, it is used as an essential reagent. The usual potential of chlorine led it to disinfectant uses and its bleaching. Chlorine is a member of the halogen series that forms the group 17 (formerly VII, VIIA, or VIIB) of the periodic table, along with fluorine, astatine, bromine and iodine. It is  nearly the most abundant halogen most abundant chemical element in Earth's crust.

More about: buy Chlorine
Read more: www.base-chemicals.net

How to Get Heptanoic acid

Heptanoic acid is colourless liquid with a pungent and rancid odour. The melting
point is  -10.5 °C and the  boiling point is 223 °C(lit.) It is slightly
soluble in water. It is combustible,stable but incompatible with strong oxidizing
agents, bases. It may likely  burn skin, eyes, and mucous membranes when
contacted with. It can be used for Intermediates of liquid and crystals.It can
also be used for lubricants andplasticizers. Its CAS is 111-14-8. Molecular
Formula: C7H14O2. Molecular Weight: 130.18g/mol.

Read more: http://www.base-chemicals.net/

Heptaldehyde for Sale

Heptaldehyde is colorless, oily liquid with a
penetrating fruity odor. The melting point is
?43 °C(lit.) and the boiling point is 153 °
C(lit.). It is insoluble in water ,hygroscopic
and flammable. It is stable,may be light
sensitive,  incompatible with strong oxidizing
agents, strong bases, strong reducing
agents.It is irritant too. It can be used for
fragrances.This product should be kept away
from flammable area.

Read more: http://www.base-chemicals.net/

How to Buy Heptanol

Heptanol is colorless liquid with a weak alcohol odor. The melting point is ?36 °C(lit.)
and the boiling point is 176 °C(lit.).It is stable,flammable,  incompatible with strong
acids, strong oxidizing agents.It is low toxic and  irritating to eyes too.It can be used
for fragrances.
CAS:111-70-6
Molecular Formula:C7H16O
Molecular Weight:116.2 g/mol

Read more: http://www.base-chemicals.net/

Undecylenic acid for Sale

Undecylenic acid is a pale yellow crystal low melting solid. The melting point is 23-25 °C(lit.) and the boiling point is 137 °C2 mm Hg(lit.). It is insoluble in water. It can be used for fragrances, cosmetics and pharmaceuticals.
CAS:112-38-9
Molecular Formula:C11H20O2
Molecular Weight:184.28 g/mol

Read more: http://www.base-chemicals.net/

How to Buy Undecanoic acid

Undecanoic acid is a white to pale yellowish low melting solid. The melting point is 28-31 °C(lit.) and the boiling point is 228 °C160 mm Hg(lit.). It is insoluble in water and irritant. It can be used for monomer of Rilsan? polyamide 11.This product should be stored from 2°C to 8°C. CAS: 112-37-8. Molecular Formula: C11H22O2. Molecular Weight: 186.29 g/mol


Read more: http://www.base-chemicals.net/